ROBO-8712 - PORTWELL ROBO-8712 CPU Board with Socket 478, 533Mhz FSB Pentium 4 processor

ROBO-8712 - PORTWELL ROBO-8712 CPU Board with Socket 478, 533Mhz FSB Pentium...

PORTWELL ROBO-8712 CPU Board with Socket 478, 533Mhz FSB Pentium 4 processor Simple Type: CPU Board

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

Audio: AC’97 2.2 Audio
BIOS: Award BIOS
Chipset/Core Logic: Intel 845GV and ICH4
Dimension: 338.5(L) x 122(W) mm; 13.33"(L) x 4.8" (W)
Display Interface: Display resolution up to 2048x1536 @ 60Hz refresh
Ethernet: 10BASE-T/100BASE-TX/1000BASE-T Ethernet; IEEE 802.3u auto-negotiation; Dual RJ-45 connector with two LED indicators
Expansion Interface: N/A
Graphic Controller: Intel GMCH integrated graphics controller
Graphic Memory: Dynamic 8 ~ 64MB shared display memory (Intel DVMT)
Hardware Monitoring: System monitor (fan, temperature, voltage)
IrDA: IrDA 1.0
Keyboard & Mouse: Two ports USB 2.0 on bracket dedicated to Keyboard & Mouse
MIO: Two serial (RS-232 x1, selectable RS-232/422/485 x1), one parallel, one FDD channel
MTBF: 96,119 hrs
PCB: 8-layer
Power Requirement: Typical:+5V@4.0A; +12V(CPU)@6.76A; +12V (system)@0.02A
Processor: CPU & Package:Intel Pentium 4 or Celeron D or Mobile Intel Pentium 4-M processor in the mPGA478 package; FSB:800/533/400MHz
Relative Humidity: 5% to 90%, non-condensing
Solid State Disk: One Type II CF socket; On Secondary EIDE channel; Bootable for no drives on primary channel
Storage Devices: Support four EIDE devices with Ultra DMA 100/66/33
System Memory: Up to 2GB DDR 400/333/266 SDRAM on two 184-pin DIMM sockets
Temperature: Operating:0 to 55°C; Storage:-20 to 80°C
USB: Six USB 2.0 ports
Watchdog Timer: Programmable via software from 0.5 sec. to 254.5 min