ROBO-8712EVG2A - Portwell ROBO-8712EVG2A CPU Board. Intel Pentium 4 or Celeron processor...
Request Quote
For Price
- Part Number:
- ROBO-8712EVG2A
- Model Number:
- ROBO-8712
- Make:
- PORTWELL
- Lead Time:
- Available
- Qty In Stock:
- Available
Portwell ROBO-8712EVG2A CPU Board. Intel Pentium 4 or Celeron processor | PICMG | DDR | VGA | Dual Gigabit Ethernet | Audio | USB 2.0 Simple Type: CPU Board
The Portwell ROBO-8712EVG2A Series Single Board Computer is a high quality and reliable design for wider range Intel Pentium 4/Celeron (D) (0.13 micron & 90 nm process) processors supporting mission critical operations. The Portwell ROBO-8712EVG2A supports the Mobile Intel Pentium 4-M processor for low power consumption applications and houses the Intel 845GV chipset with high performance integrated graphics, backed up by Intel EID’s long product life support. The Portwell ROBO-8712EVG2A is the best cost/performance solution, targeted at most of the industrial applications. The ROBO-8712EVG2A series delivers dual on-board Gigabit Ethernet for the network redundancy application; and standard features for embedded system deployment like Hardware monitoring, Watchdog Timer, Solid State Disk and Wake-On-LAN.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Dual on-board Gigabit Ethernet for network redundancy application
- High quality and reliable design for wider range Intel Pentium 4/Celeron (D)(.13 micron & 90 nm process support mission critical operation
- Intel 845GV chipset with high performance integrated graphics, backed up by Intel EID's long product life support
- Standard features for embedded system deployment like hardware monitoring, watch dog timer, SSD and Wake-On-LAN
- Support Intel Pentium 4 or Celeron (0.13 micron & 90nm process) processor support in mission critical operation
- Support Mobile IntelR PentiumR 4-M processor in the mPGA478 package for low power consumption application
Specifications
- Audio: AC'97 2.2 Audio
- BIOS: Award BIOS
- Board Type: Full Size
- Bus Architecture: PICMG
- CPU: Intel Pentium 4/Celeron or Mobile Intel Pentium4-M Processor in the mPGA478 package 533/400MHz FSB
- Dimensions: 338.5(L)x122(W)mm; 13.33"(L)x4.8"(W)
- Display Interface: Display resolution up to 2048x1536 @ 60Hz refresh
- Ethernet: 10BASE-T/100BASE-TX/1000BASE-T Ethernet; IEEE 802.3u auto-negotiation; Dual RJ-45 connector with two LED indicators
- Floppy Disk Drive: One Channel
- Graphic Memory: Dynamic 8~ 64MB shared display memory(Intel DVMT)
- Graphics Controller: Intel GMCH integrated graphics controller
- H/W Status Monitoring: System monitor (fan, temperature, voltage)
- IrDA: IrDa 1.0
- Keyboard & Mouse: Two ports USB 2.0 on bracket for keyboard & Mouse
- MIO: Two serial (RS-232x1, selectable RS-232/422/485x1)
- MTFB: 96,119 hrs
- Operating Humidity: 5% to 90%, non-condensing
- Operating Temperature: 0 to 55C
- Parallel Port: One
- PCB: 8-layer
- Power Requirement: +5V@4.0A; +12V(CPU)@6.76A; +12V (system)@0.02A
- Processor: Intel Celeron
- SBC Size: Full-Length
- SSD: One Type II CF socket; On secondary EIDE channel; Bootable for no drives on primary channel
- Storage Devices: Support four EIDE devices with Ultra DMA 100/66/33
- Storage Temperature: -20 to 80C
- System Chipset: Intel 845GV and ICH4
- System Memory: Up to 2GB DDR 33/266 SDRAM on two 184-pin DIMM sockets
- USB: Six USB 2.0 Ports
- Watchdog Timer: Programmable via software from 0.5 sec to 254.5 min.
Applications
- None Available
Aliases
- None Available