ROBO-698 REV 216006980098 - Pentium III or Celeron processor based PICMG Single board computer with VGA and Fast Ethernet

ROBO-698 REV 216006980098 - Pentium III or Celeron processor based PICMG Single board computer...

Pentium III or Celeron processor based PICMG Single board computer with VGA and Fast Ethernet Simple Type: CPU Board

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

General

ACPI Function: ATX function with 4-pin header connect to backplane, Modem-Ring-On and Wake-On-LAN
Approval: CE, FCC Class A
BIOS: Award BIOS
Chipset: Intel 82440BX AGset
CPU: Intel Pentium III Celeron processor in the FC-PGA/PPGA 370 package
Dimension: 338.5(L) x 122(W)/13.33"(L) x 4.8" (W)
Display: C&T 69000 video display chip, 2MB display memory, resolution up to 1280x1024 at refresh rate 60Hz, support for CRT or TFT/DSTN flat panel (optional), TMDS/LVDS interface support (optional)
EIDE: Support four EIDE devices with Ultra DMA 33
Ethernet: 10BASE-T/100BASE-TX Ethernet, IEEE 802.3u auto-negotiation support, ONe RJ-45 connector
FDD: 2
Hardware Monitoring: System monitor (fan, temperature, voltage)
Humidity: 5% to 95%, non condensing
I/O Chipset: Onboard Winbond W83977ATF super I/O
IrDA: 1
ISA Bus: 64mA high driving ISA bus interface to backplane for legacy ISA slots
Memory: Up to IGB PC100 SDRAM on four 168-pin DIMM sockets. Supports ECC
MTBF: 114,078 hrs
Operating Temperature: 0 to 55 C
Parallel ports: 1
Power Requirement: +5V@6A; +12V@140mA; -12V@30mA(typ)
Processor: Intel Pentium III
Serial ports: 2
Solid State Disk: DOC socket for up to 288MB
Storage Temperature: -20 to 75 C
USB ports: 2
Watchdog Timer: Adjustable via hardware jumper setting from 0.5 sec. to 64 sec. Programmable via software from 0.5 sec to 254.5min.