PORTWELL Industrial Partner

CAL-SBC-710VL - Portwell CAL-SBC-710VL CPU Board - Full-Size Socket 478 Pentium 4...

larger image

Request Quote
For Price
Part Number:
Model Number:
Lead Time:
Qty In Stock:

Portwell CAL-SBC-710VL CPU Board - Full-Size Socket 478 Pentium 4 32bit/33MHz CPU Card with VGA & LAN Simple Type: CPU Board

Download the datasheet (PDF)

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.


  • ATI Rage 128 Pro AGP 4X (1.5V) VGA controller with 16MB on die memory
  • Intel 845 Chipset
  • Intel ICH2 embedded MAC with Intel 82562EM (PLC) PHY 10/100 Ethernet controller
  • Intel Socket 478 Pentium 4 CPU with 400MHz System Bus up to 2GHz+
  • Max. 3GB Memory, 168-pin SDRAM DIMM x 3


  • BIOS: Award System BIOS | Plug & Play support | Advanced Power Management support | Advanced Configuration & Power Interface support | 4M bits flash ROM
  • Certification: CE approval | FCC Class A
  • Chip Set: Intel 845 (MCH) Chipset | PCI V2.2 compliant
  • CPU Support: Intel Pentium 4 CPU with 256K cache on die, CPU running at 400MHz system bus up to 2GHz+ | Support streaming SIMD instruction
  • Dimensions: 338 mm(L) x 122 mm(W)
  • Environments: Operating temperatures: 0ºC to 60ºC | Storage temperatures: -20ºC to 80ºC | Relative humidity: 10% to 90% (Non-condensing)
  • Main Memory: Support SDRAM up to 3GB (Max.) | 168-pin DIMM x 3 | ECC support | No Registered DIMM Support
  • ON Board 1/O: ITE 8712F-A Server I/O | SIO x 2, with 2 x 16C550 UARTs, 10 pin header x 1, D-Sub 9 pin x1 | PIO x 1, bi-directional, EPP/ECP support, 26 pin connector x 1 | Floppy Disk controller: 34 pin connector x 1 | On chip enhanced IDE x 2, Utra DMA33/66/100 support, 40 pin connector x 2 | External Keyboard 5 pin connector x 1; 6 pin mini DIN connector x 1, for PS/2 keyboard/mouse | On board buzzer x 1 | On board 2 pin header for I2C; GPIO (4 in 4 out) x 1 | On board 5 pin header for IrDA x 1 | On board 2 pin header for reset SW, 5 pin for keylock, 2 pin header for power push button, 3 Pin Jst (5Vsb, PS-On, GND) to Backplane
  • On Board LAN: Intel ICH2 embedded MAC with Intel 82562EM(PLC) PHY 10/100 Ethernet controller | 10/100 base T/TXx 1 support, full duplex | Compliant with PCI V2.2, IEEE 802.3X | Drivers support: DOS/Windows, Windows 95/98/2000Windows NT, Netware, SCO Open Server 5.0, Linux | RJ45 connector x1 | Support Remote Monitoring (Alerting on LAN)
  • On Board proprietary PCI interface: 32 bit PCI interface for EBK Module
  • On Board RTC: High precision real time clock/calendar
  • On Board Solid State Disk Socket: Power header beside IDE connector to support DOM
  • On Board VGA: ATI Rage 128 Pro (Ultra4XL with 16MB memory on board; 1.5V AGP 4X interface | Fully PC98 and PC99 Compliant
  • Power Requirements: +5V: 10A (Max.) | +12V: 10A (Max.) | -12V: 50mA (Max.)
  • System Architecture: Full size SBC with 32bit/33MHz PCI/ISA Golden finger | Intel Socket 478 Pentium 4 with 400MHz System Bus | PCI V 2.0 compliant | PICMG 1.0 (Rev.2.0) compliant
  • System Monitor: Driver from SuperIO ITE 8712F-A to system monitor controller | 8 voltages (For+1.8V, +3.3V, +5V, -5V, +12V, -12V Vcore and Vcc5Vstand-By | Fan Speed (For CPU) x1; Fan speed (For System) x2 | Temperatures x3;(one for CPU, the others for the system) ISAMAX Support | Maximize ISA signals to support ISA cards up to 20
  • Watchdog Timer: 1~64 seconds time-out intervals



  • None Available


  • None Available