ROBO-608VGACONNECTOR - Portwell ROBO-608VGACONNECTOR CPU Board

ROBO-608VGACONNECTOR - Portwell ROBO-608VGACONNECTOR CPU Board - VGA connector for robo-608 Simple...

Portwell ROBO-608VGACONNECTOR CPU Board - VGA connector for robo-608 Simple Type: CPU Board

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

C&T 69000 and 2 MB SDRAM provide a high performance, low power, highly integrated solution and versatile panel support
ECC function for data sensitive application
Intel 440BX AGPset, the most stable and highly market recognized chipset from Intel
One DOC socket for booting Windows NT directly
PC/104 expansion connector for higher flexibility and expandibility
PC100 MHz SDRAM for cost effective memory support
Reliable design for high speed Intel Pentium III or Celeron processor
Standard features for embedded system, like H/W monitoring, WDT, SSD and Wake-on-LAN

General

ACPI Function: ATX function with 4-pin header connect to backplane
Approval: FCC, CE class A
BIOS: AMI BIOS
Board Dimension: 338.5(L) x 129(W) mm ; 13.33"(L) x 5.1"(W); 6-layer PCB
Chipset: Intel 82440BX AGPset
CPU: Intel Pentium III processors in the FC-PGA 370 package; Intel Celeron processors in the PPGA & FC-PGA 370 package
Expansion Interface: PC/104 expansion connector
Hardware Monitor: System monitor (fan, temperature, voltage)
ISA Bus: 64mA high drivig ISA bus interface to backplane for legacy ISA slots
Keyboard/Mouse: One mini-DIN 6-pin connector for keyboard and mouse; One 5-pin header for external keyboard connection
L2 Cache Memory: Built-in CPU
Memory: Up to 1GB PC100 SDRAM on four 168-pin DIMM sockets; ECC support
On-Board I/O: On-board Winbond W83977ATF super I/O; Support for four EIDE devices with Ultra DMA/33; Up to two floppy disk drives; Two serial, one parallel, one IrDA and two USB ports
Power Consumption: +5V@6A (typ.) ; +12V@140mA, -12V@30mA
Relative Humidity: 5% to 95%, non-condensing
System Bus Frequency: 66/100 MHz
Temperature: Operating:0 to 55°C; Storage:-20 to 75°C
Watchdog Timer: Programmable via software from 0.5 sec. to 254.5 min.; Adjustable via hardware jumper setting from 0.5 sec. to 64 sec.