ROBO-503 - Portwell ROBO-503 3.5" low power NS Geode GX1 processor based...
- Part Number:
- ROBO-503
- Model Number:
- ROBO-503
- Make:
- PORTWELL
- Lead Time:
- Available
- Qty In Stock:
- Available
Portwell ROBO-503 3.5" low power NS Geode GX1 processor based embedded system board with CRT/LCD, dual fast ethernet and audio Simple Type: CPU Board
On-board NS Geode GX1 integrated processor for low power consumption, high performance and x86 multimedia architecture support. NS Geode CS5530 chipset together with Geode processor provides a system-level solution. SODIMM SDRAM for space saving solution. NS Geode CX5530 chipset with up to 4 MB shared display memory for CRT and 18-bit TFT panel support. On-board dual Intel 10BASE-T/100BASE-TX Fast Ethernet for high speed data transfers. Audio Codec '97 (AC '97) 2.0 for a high-quality audio architecture. Type II CompactFlash socket for embedded storage solution. PC/104 expansion connector for higher flexibility and expandibility.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- Audio Codec '97 (AC '97) 2.0 for a high-quality audio architecture
- NS Geode CS5530 chipset together with Geode processor provides a system-level solution
- NS Geode CX5530 chipset with up to 4 MB shared display memory for CRT and 18-bit TFT panel support
- On-board dual Intel 10BASE-T/100BASE-TX Fast Ethernet for high speed data transfers
- On-board NS Geode GX1 integrated processor for low power consumption, high performance and x86 multimedia architecture support
- PC/104 expansion connector for higher flexibility and expandibility
- SODIMM SDRAM for space saving solution SODIMM SDRAM for space saving solution
- Type II CompactFlash socket for embedded storage solution
Specifications
- BIOS: Award 256KB FLASH BIOS
- Board Type: 3.5 in
- Chipset: NS CX5530
- Chipset: NS Geode CS5530
- CPU: On-board NS Geode GX1 200/300MHz (available in different speeds by special order) BGA package (Capable to support NS Geode GXm, GXLV, and GX1)
- Dimensions: 150(L) x 100(W) mm (3.5" FDD-size) 5.9"(L) x 3.94"(W)
- Display Interface: Simultaneously display CRT and flat panel
- Ethernet: On-board dual Intel 82559ER PCI-bus Ethernet controllers PCI 100/10 Mbps, IEEE 802.3U compatible For diskless system
- IrDA: Two USB ports, one IrDA interface
- Memory: Shared display memory up to 4MB
- MIO: Winbond W83977F-A Two RS-232, one Parallel port
- Operating Humidity: 5 to 95% non-condensing
- Operating Temperature: 0 to +558C
- Power Supply: 5V@1.66A w/GX1 200MHz
- Processor: NS Geode GX1 300MHz
- Storage Devices: Generate a system reset, IRQ15 or NMI. Software selectable time-out interval (16 sec. ~ 7666 sec., 30 sec./step)
- Storage Temperature: -40 to +758C
- System Memory: On-board one 144pin SODIMM socket supports up to 256 MB SDRAM
Applications
- None Available
Aliases
- None Available
Related Items
PEB-2530VL
Portwell PEB-2530VL - 3.5" embedded system board, based on low
ROBO-513
Portwell ROBO-513 3.5" CPU Board | with Low Power VIA
ROBO-503N
Portwell 3.5" ROBO-503N CPU Board with low power NS Geode
ROBO-513N
Portwell ROBO-513N 3.5" CPU Board | with Low Power VIA